Transmission Mount Replacement (2WD)

Fig 1: View Of Transmission Mount, Crossmember Nut & Bolts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Support the transmission with a transmission jack.
1	Transmission Mount to Crossmember Nut CAUTION: Refer to Fastener Caution . Tighten 55 N.m (41 lb ft)
2	Transmission Mount Bolt (Qty: 2) Tighten 67 N.m (49 lb ft)
3	Transmission Mount NOTE: Raise the transmission with the transmission jack just enough to remove the transmission mount.