Fastener Tightening Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Jounce Bumper Mounting Nut - 2500 | 32 | 24 lb ft |
| Rear Axle Lower Control Arm Bolts | ||
|
100 | 63 lb ft |
|
plus 55 degrees | |
| Rear Axle Tie Rod End Bolt (to Axle) | 100 | 74 lb ft |
| plus 100 degrees | ||
| Rear Axle Tie Rod End Bolt (to Frame) | 85 | 63 lb ft |
| plus 125 degrees | ||
| Shackle to Frame Bracket Nut - 2500 | 95 | 70 lb ft |
| Shackle to Spring Nut - 2500 | 95 | 70 lb ft |
| Shock Absorber Nuts | 115 | 85 lb ft |
| Spring to Front Hanger Nut - 2500 | ||
|
170 | 125 lb ft |
|
plus 48 degrees | |
| Stabilizer Shaft Insulator Clamp Bolts | 32 | 24 lb ft |
| Stabilizer Shaft Link Nuts | ||
|
65 | 48 lb ft |
|
plus 40 degrees | |
| U-Bolt Nut - 2500 | 100 | 74 lb ft |
| Rear Axle Upper Control Arm Bolts | ||
|
100 | 74 lb ft |
|
plus 55 degrees | |