LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Stabilizer Shaft Insulator Replacement (2500)

Stabilizer Shaft Insulator Replacement (2500)

Fig 1: View Of Stabilizer Shaft Insulator & Components (2500, 3500)
GM1865485Courtesy of GENERAL MOTORS COMPANY
Stabilizer Shaft Insulator Replacement (2500)

Callout Component Name

Preliminary Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the engine shield, if equipped. Refer to Engine Shield Replacement .
1 Stabilizer Shaft Clamp Bolt (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
50 N.m (37 lb ft)
2 Stabilizer Shaft Clamp
3 Stabilizer Shaft Insulator
TIP:  Ensure that the slit in the insulator is facing the front of the vehicle when installed.
scientia non olet · About LEMON Manuals