Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement (HP2)

Fig 1: Air Conditioning (A/C) Refrigerant Pressure Sensor (HP2)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Disconnect the electrical connector from the pressure sensor. Remove the upper radiator air baffle.
1	A/C Refrigerant Pressure Sensor CAUTION: Refer to Fastener Caution . TIP: Remove and discard the O-ring. Refer to Air Conditioning O-Ring Seal Replacement . Tighten 6 N.m (53 lb in)

Callout

Component Name

Preliminary Procedures

A/C Refrigerant Pressure Sensor

CAUTION:

TIP: Remove and discard the O-ring. Refer to Air Conditioning O-Ring Seal Replacement .
Tighten
6 N.m (53 lb in)