Battery Fan Assembly Components
WARNING: This page is about a different variant/trim than selected.
Battery Fan Assembly Components
| Callout | Component Name |
|---|---|
| 1 | Battery Cooling Air Outlet Duct |
| 2 | Drive Motor Battery Cable Terminal Nut
CAUTION:
Refer to Fastener Caution . TIP: Remove cable retainer from battery fan assembly. Tighten 5 (44 lb in) |
| 3 | Battery Vent Fan Duct Retainer |
| 4 | Drive Motor Generator Battery Cooling Outlet Duct |
| 5 | Drive Motor Generator Battery Cooling Blower Nut (Qty: 2) Tighten 6 (53 lb in) |
| 6 | Drive Motor Battery Cooling Blower Bolt Tighten 6 (53 lb in) |
| 7 | Battery Fan Assembly |