LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Hybrid/EV Energy Storage System) >> Diagnostic Information and Procedures >> DTC P0ADF or P0AE0 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P0ADF 

The control circuit voltage is 2 V less than B+ when the negative contactor relay is commanded closed.

P0AE0 

The control circuit voltage is within 2 V of B+ when the negative contactor relay is commanded open.

scientia non olet · About LEMON Manuals