LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Hybrid/EV Energy Storage System) >> Diagnostic Information and Procedures >> DTC P0AC0-P0AC2 or P1A07 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.

Ignition ON, observe the scan tool Calc. Hybrid Batt. Current parameter. The reading should be between -200 and +200 A, and change with the amount of current draw on the drive motor generator battery.