LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Hybrid/EV Energy Storage System) >> Diagnostic Information and Procedures >> DTC P0ABB, P0ABC, or P0ABD >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P0ABB 

The drive motor generator battery control module detects a 50 V difference between the hybrid battery pack calculated voltage and the hybrid battery terminal voltage for 7 seconds.

P0ABC 

The drive motor generator battery control module detects the terminal voltage is less than 50 V for 3 seconds.

P0ABD 

The drive motor generator battery control module detects the terminal voltage is greater than 430 V for 3 seconds.