LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Hybrid/EV Energy Storage System) >> Diagnostic Information and Procedures >> DTC P0A80 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.

Ignition ON, observe the scan tool BECM Hybrid Batt. Pack Resistance parameter. The reading should be less than the resistance values specified in Drive Motor Battery End of Life Resistance .