Transmission Mount Replacement

WARNING: This page is about a different variant/trim than selected.

Fig 1: View Of Transmission Mount & Bolts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Support the transmission with a transmission jack.
1	Transmission Mount to Crossmember Nut (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 55 N.m (41 lb ft)
2	Transmission Mount Bolt (Qty: 2) Tighten 67 N.m (49 lb ft)
3	Transmission Mount TIP: Raise the transmission with the transmission jack just enough to remove the transmission mount.