Manual Shift Shaft Seal Replacement
WARNING: This page is about a different variant/trim than selected.
Manual Shift Shaft Seal Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the manual shift shaft position switch. Refer to Manual Shift Shaft Position Switch Replacement . |
|
| 1 | Manual Shift Shaft Seal
CAUTION:
Do not damage the case bore during removal of the manual shift shaft seal.
CAUTION:
When installing the seal, ensure the seal lip is firmly seated against the case bore surface. Do not allow the seal lip to be crushed, or a leak may result.
NOTE:
Always install a NEW seal into the case. Special Tools
|