LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Hybrid/EV Control System) >> Diagnostic Information and Procedures >> Engine Will Not Crank >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.
  1. Ensure the range selector lever is in Park or Neutral.
  2. Turn the ignition key to crank.
  3. The engine should instantly crank and run.
    • If the engine starts and runs, the system is operating normally.