LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Hybrid/EV Control System) >> Diagnostic Information and Procedures >> DTC P1AF4-P1AF7 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P1AF4 and P1AF6 

The motor control module detects isolation sensor voltage less than 0V.

P1AF5 and P1AF7 

The motor control module detects isolation sensor voltage greater than 564V.