Typical Scan Tool Data
WARNING: This page is about a different variant/trim than selected.
HVIC Source Current - Battery Energy Control Module
| Circuit | Short to Ground | Open | Short to Voltage |
|---|---|---|---|
| Operating Conditions:
Ignition ON Parameter Normal Range: 12 mA1 |
|||
| HVIC Source | 12 mA | 0 mA | 0 mA |
| HVIC Return | 12 mA | 0 mA | 0 mA |
| 1 Parameter may vary from a DMM measurement by 6 mA | |||
HVIC Return Current - Battery Energy Control Module
| Circuit | Short to Ground | Open | Short to Voltage |
|---|---|---|---|
| Operating Conditions:
Ignition ON Parameter Normal Range: 12 mA1 |
|||
| HVIC Source | 0 mA | 0 mA | 39 mA |
| HVIC Return | 0 mA | 0 mA | 39 mA |
| 1 Parameter may vary from a DMM measurement by 6 mA | |||
Hybrid Powertrain Control Module HVIC Status - Hybrid Powertrain Control Module
| Circuit | Short to Ground | Open | Short to Voltage |
|---|---|---|---|
| Operating Conditions:
Ignition ON Parameter Normal Range: Pass1 |
|||
| HVIC Source | Fail | Fail | Pass |
| HVIC Return | Pass | Fail | Fail |
| 1 Parameter indicates Fail whenever high voltage contactor relays are commanded open | |||
Battery Energy Control Module HVIC Status - Hybrid Powertrain Control Module
| Circuit | Short to Ground | Open | Short to Voltage |
|---|---|---|---|
| Operating Conditions:
Ignition ON Parameter Normal Range: Pass1 |
|||
| HVIC Source | Fail | Fail | Fail |
| HVIC Return | Fail | Fail | Fail |
| 1 Parameter indicates Indeterminate whenever high voltage contactor relays are commanded open | |||