Diagnostic Fault Information
WARNING: This page is about a different variant/trim than selected.
| Circuit | Short to Ground | Open/High Resistance | Short to Voltage | Signal Performance |
|---|---|---|---|---|
| 5-Volt Reference (ECM) | ECM P0641, P0651 / P1AC6 | ECM P0335 / P1AC6 | ECM P0651, P2135 / P1AC6 | - |
| Crank Shaft Position Sensor Signal1 | ECM P0335 / P1AC6 | ECM P0335 / P1AC7 | ECM P0335 / P1AC6 | ECM P0336 / P1AC7 |
| Low Reference1 | - | ECM P0335 / P1AC7 | ECM P0335 / P1AC6 | - |
| 1 ECM DTCs will not set with an open circuit condition between the circuit splice and the hybrid powertrain control module. | ||||