Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P0AEE, P0AF3, P0BD2, P0BD7, P0BDC, and P0BE1

A 15°C ( 27°F) difference is observed between the individual inverter phase temperature sensor and the average of all the inverter phase temperatures.
The above condition is present for 4 seconds.

P0AEF, P0AF4, P0BD3, P0BD8, P0BDD, and P0BE2

The inverter phase temperature sensor is greater than 125°C (275°F) for 3 seconds.

P0AF0, P0AF5, P0BD4, P0BD9, P0BDE, and P0BE3

The inverter phase temperature sensor is less than -40°C (-40°F) for 3 seconds.