LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Hybrid/EV Control System) >> Diagnostic Information and Procedures >> DTC P0A2B-P0A2D or P0A31-P0A33 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P0A2B and P0A31 

The average of the three motor phase sensor temperatures and the motor temperature are not within 28°C (50°F) of each other at ignition ON for 3 seconds.

P0A2C and P0A32 

Motor temperature sensor signal is less than 0.29 V for 3 seconds.

P0A2D and P0A33 

Motor temperature sensor signal is greater than 4.42 V when drive motor generator torque is greater than 20 N.m (14.75 lb ft) for 3 seconds.

scientia non olet · About LEMON Manuals