Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

P0A2B and P0A31

DTCs P0A2C, P0A2D, P0AEF, P0AF0, P0BD3, P0BD4, P0BDD, P0BDE are not set.
Ignition ON after the engine has been OFF for at least 6 hours.
Average of phase U, V, W inverter temperatures is greater than -12°C (+10°F).
Motor temperature is greater than -40°C (-40°F).

P0A2C, P0A2D, P0A32 and P0A33

The ignition is ON.