LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Antilock Brake System - Hybrid) >> Diagnostic Information and Procedures >> DTC C0294, C120C, or C12F8 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.

Ignition ON, use a scan tool to observe the EBCM BMC Primary Piston Position Sensor A and B parameter while applying and releasing the brake pedal. The voltage should change between 0-5 V.

scientia non olet · About LEMON Manuals