Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
- Boost pressure command greater than boost pressure +1500 kPa (217 psi) for 250 ms.
- Master cylinder pressure greater than boost pressure -200 kPa (29 psi) for 250 ms.
- Accumulator pressure greater than 16,000 kPa (2320 psi) for 250 ms.
- DTCs C12BC, C12BD, C12BE, C128A, C128D, C127D, C12E4, C1255, C1256, C126E, C123C, or C127C not set.