LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Antilock Brake System - Hybrid) >> Diagnostic Information and Procedures >> DTC C012D, C120A, C128A, C128D, C12BC, C12BD, or C12BE >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different variant/trim than selected.
  1. Verify that no other DTCs are set.
  2. Using a scan tool, perform the EBCM, module setup, and EBCM Relearn.
  3. Verify that DTC C012D, C120A, C128A, C128D, C12BC, C12BD, or C12BE is not set.
    • If DTC is set replace brake pressure modulator valve (BPMV) assembly. If the DTC resets, replace the EBCM.
scientia non olet · About LEMON Manuals