LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Antilock Brake System - Hybrid) >> Diagnostic Information and Procedures >> DTC C012A, C128B, C128E, or C12B2-C12B4 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.
  1. Using a scan tool, perform the EBCM, Module Setup, EBCM Relearn.
  2. Verify that DTC C012A, C128B, C128E, C12B2, C12B3, or C12B4 is not set.
    • If the DTC is set replace brake pressure modulator valve assembly. If the DTC resets, replace EBCM.
scientia non olet · About LEMON Manuals