Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

C0035 04 - C0050 04, C0035 0E - C0050 0E, C1207 - C1210, or C1232 - C1235

A short to voltage, short to ground or an open/high resistance is detected on a wheel speed sensor circuit.

C0035 26 - C0050 26, C0035 27 - C0050 27, C0035 1F - C0050 1F, C1221 - C1224, or C1225 - C1228

A missing wheel speed sensor signal.
An erratic signal output of the wheel speed sensor is detected.
The EBCM detects a change in wheel speed that exceeds 20 km/h (12 mph) between two 10 millisecond wheel speed samples.