LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Electrical System - Hybrid) >> Repair Instructions >> Generator Control Module Ground Strap Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Drive Motor Generator Control Module Ground Strap & Bolt
    GM1968778Courtesy of GENERAL MOTORS COMPANY
  1. Remove the air cleaner assembly. Refer to Upper Intake Manifold Cover Replacement .
  2. Remove the drive motor generator control module ground strap bolt (1) and strap (2).