LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Electrical System - Hybrid) >> Repair Instructions >> Battery Tray Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Battery Tray Components
    GM1968744Courtesy of GENERAL MOTORS COMPANY
  1. Install the battery tray (3) into the vehicle.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the battery tray to battery tray reinforcement bolts (1) and tighten to 9 N.m (80 lb in).
  3. Install the battery tray support bolts (2) and tighten to 9 N.m (80 lb in).
  4. Install the battery tray to auxiliary BEC bolt (4) and tighten to 9 N.m (80 lb in).
  5. Install the positive and negative battery cables.
  6. Install the battery. Refer to Battery Replacement .
scientia non olet · About LEMON Manuals