LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Electrical System - Hybrid) >> Repair Instructions >> Battery Negative Cable Disconnection and Connection >> Connect Procedure

Connect Procedure

WARNING: This page is about a different variant/trim than selected.
NOTE:

Clean any existing corrosion from the battery terminal and the battery cable .

    Fig 1: Locating Battery Components
    GM1968005Courtesy of GENERAL MOTORS COMPANY
  1. Install the negative battery cable (6) to the battery.
  2. Rotate the lever lock (4) clockwise until an audible click is heard in order to connect the negative battery cable to the battery.
  3. Position the negative battery cable insulating cover (5) over the negative terminal.
scientia non olet · About LEMON Manuals