LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Electrical System - Hybrid) >> Diagnostic Information and Procedures >> DTC B1516 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.

Ignition ON, headlamps and all accessories OFF, observe the scan tool BCM Battery Current parameter. The reading should be between -5 amps and -25 amps, and change with the amount of current draw on the battery.

scientia non olet · About LEMON Manuals