LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Automatic Transmission - 2ML70 - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Torque Dampener Housing Cleaning and Inspection

Torque Dampener Housing Cleaning and Inspection

WARNING: This page is about a different variant/trim than selected.
Fig 1: Torque Dampener Housing Cleaning and Inspection
GM1867819Courtesy of GENERAL MOTORS COMPANY
Torque Dampener Housing Cleaning and Inspection

Callout Component Name

Preliminary Procedures

  1. Thoroughly clean the torque dampener housing assembly, including threads, with clean solvent.
  2. Clean sealing surfaces.
  3. Inspect all threaded holes. If necessary, repair any thread damage.
1 Input Shaft Bushing
2 Trans Fluid Cooler Pipe Fitting Seals (Qty: 2)
CAUTION:

Refer to Seal Reuse Caution .


TIP:  Refer to Transmission Fluid Cooler Pipe Fitting Seal Replacement .
3 Auxiliary Fluid Pump Sealing Surface
TIP:  Clean any gasket material.
scientia non olet · About LEMON Manuals