Park Pawl Replacement: Installation
WARNING: This page is about a different variant/trim than selected.
Installation
| Callout | Component Name |
|---|---|
| 1 | Park Pawl Spring |
| 2 | Park Pawl |
| 3 | Park Pawl Shaft |
| 4 | Park Pawl Shaft Hole Plug |
| 5 | Park Pawl Actuator Guide |
| 6 | Park Pawl Actuator Guide |
| 7 | Park Pawl Cover Gasket |
| 8 | Park Pawl Cover |
| 9 | Park Pawl Cover Bolt M6 x 1.0 x 20 (Qty: 5)
CAUTION:
Refer to Fastener Caution . Tighten 9-13 N.m (80-115 lb in) |