Output Speed Sensor and Case Extension Removal
WARNING: This page is about a different variant/trim than selected.
Output Speed Sensor and Case Extension Removal
| Callout | Component Name |
|---|---|
| 1 | A/Trans Rear Case Bolt M10 x 1.5 x 45 (Qty: 6) |
| 2 | 2WD Output Housing Extension Assembly TIP: There is also a 4WD option with bolts and torque sequence the same as the 2WD. |
| 3 | Gasket (2WD Outlet Only) |
| 4 | Vehicle Speed Sensor Bolt |
| 5 | A/Trans Output Speed Sensor Assembly |
| 6 | A/Trans Output Speed Sensor O-Ring Seal |