Manual Shift Shaft Position Switch Overhaul

WARNING: This page is about a different variant/trim than selected.

Fig 1: Manual Shift Shaft Position Switch Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	A/Trans Manual Shift Shaft Position Switch Bolt M5 x0.8 x 20 CAUTION: Refer to Pin Reuse Caution . CAUTION: Refer to Fastener Caution . Tighten 7-9 N.m (62-80 lb in)
2	Manual Shift Shaft Pin CAUTION: Refer to Pin Reuse Caution .
3	Manual Shift Shaft
4	A/Trans Manual Shift Shaft Position Switch Assembly
5	Park Pawl Actuator Assembly