Hybrid Low, 1-2 Clutch Piston Installation

WARNING: This page is about a different variant/trim than selected.

Fig 1: Hybrid Low, 1-2 Clutch Piston Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Hybrid Low, 1-2 Clutch Piston
2	Hybrid Low, 1-2 Clutch Return Spring Assembly
3	Hybrid Low, 1-2 Clutch Plate - Waved
4	Hybrid Low, 1-2 Clutch Plate
5	Hybrid Low, 1-2 Clutch Plate Assembly
6	Hybrid Low, 1-2 Clutch Backing Plate Assembly TIP: Make sure to install with lip facing up, see orientation.
7	Hybrid Low, 1-2 Clutch Piston Retaining Ring Install a NEW retaining ring. Do not reuse the old retaining ring. Start retaining ring at one end, work around to the other end. Special Tools J-46632 Spring Compressor