Hybrid Direct, 2-3-4 Clutch Support Installation

WARNING: This page is about a different variant/trim than selected.

Fig 1: Hybrid Direct, 2-3-4 Clutch Support Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Hybrid Direct, 2-3-4 Clutch Support Gasket
2	Hybrid Direct, 2-3-4 Clutch Support Assembly
3	Hybrid Direct, 2-3-4 Clutch Support Bolt M6 x 1.0 x 20 (Qty: 9) CAUTION: Refer to Fastener Caution . Tighten 9-13 N.m (80-115 lb in) Special Tools DT-48784 E8 Modified Torx Socket For equivalent regional tools refer to Special Tools .
4	Hybrid Direct, 2-3-4 Clutch Housing Seal Ring