Fluid Pump Selective Measurement
WARNING: This page is about a different variant/trim than selected.
Fluid Pump Selective Measurement
| Callout | Component Name |
|---|---|
| 1 | Pump Rotor Cavity TIP: Measure the distance from the bottom of the gauge bar to the bottom of the pump rotor cavity. Refer to Fluid Pump Selective Specifications . |
| 2 | A/Trans Fluid Pump Rotor TIP: Refer to Fluid Pump Selective Specifications to select the correct rotor. |
| 3 | A/Trans Fluid Pump Slide TIP: Refer to Fluid Pump Selective Specifications to select the correct slide. |