Control Solenoid Valve and Valve Body Assembly Disassemble

WARNING: This page is about a different variant/trim than selected.

Fig 1: Control Solenoid Valve and Valve Body Assembly Disassemble

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Control Solenoid Valve Heat Sink (w/Body and TCM) Bolt M5 x .8 x 53 (Qty: 2)
2	Control Valve Lower Body Bolt M6 x 1.0 x 55 (Qty: 9)
3	Control Solenoid (w/Body and TCM) Valve Assembly
4	Control Valve Channel Plate Spacer Plate Gasket CAUTION: Use care when handling the control valve body assembly. If dropped, damage to the control solenoid valve body assembly internal components, including the transmission control module (TCM), may result. CAUTION: Discard the filter plate. Replace with a NEW filter plate. Reusing an old filter plate may cause damage to the control solenoid valve assembly.
5	A/Trans Wiring Harness Assembly