1-3 Clutch Plate Installation
WARNING: This page is about a different variant/trim than selected.
1-3 Clutch Plate Installation
| Callout | Component Name |
|---|---|
| 1 | 1-3 Clutch Plate - Waved |
| 2 | 1-3 Clutch Plate TIP: Alternate between steel and fiber clutch plates. |
| 3 | 1-3 Clutch Plate Assembly TIP: Alternate between steel and fiber clutch plates. |
| 4 | 1-3 Clutch Backing Plate TIP: Make sure to install with lip facing up. See orientation. |
| 5 | 1-3 Clutch Retaining Ring TIP: Do not reuse the retaining ring. |