Oil Pump, Screen and Crankshaft Oil Deflector Removal
WARNING: This page is about a different variant/trim than selected.
- Remove the oil pump screen bolt (2) and nuts (3).
- Remove the oil pump screen (4) with O-ring seal (1).
- Remove the O-ring seal from the pump screen.
- Discard the O-ring seal.
- Remove the remaining crankshaft oil deflector nuts.
- Remove the crankshaft oil deflector.
- Remove the oil pump bolts (411).
- Remove the oil pump (413).
IMPORTANT:
Do not allow dirt or debris to enter the oil pump assembly. Cap ends, as necessary.