LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine Mechanical - Hybrid ( LZ1) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Oil Pump Disassemble

Oil Pump Disassemble

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Disassembled View Of Oil Pump
    GM1967325Courtesy of GENERAL MOTORS COMPANY
    IMPORTANT:

    The internal components of the oil pump assembly are not serviced separately. If the oil pump components are worn or damaged, replace the oil pump as an assembly.

  1. Remove the oil pump cover bolts (408).
  2. Remove the oil pump housing cover (409).
  3. Remove the oil pump rotor (456) and vane rings (410).
  4. Remove the oil pump vanes (457).
  5. Remove the oil pump slide spring (416).
  6. Remove the oil pump slide seal (414) and slide seal (415).
  7. Remove the oil pump slide (412).
  8. Remove the oil pump housing (458) from the pump housing (413).
scientia non olet · About LEMON Manuals