Control Solenoid Valve Assembly
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
| 1 | Pressure Control Solenoid 2 |
| 2 | Pressure Control Solenoid 4 |
| 3 | Shift Solenoid 2 |
| 4 | 16 Pin Connector |
| 5 | Line Pressure Control Solenoid |
| 6 | Transmission Fluid Pressure Switch 4 |
| 7 | Pressure Control (PC) Solenoid 6 - Not Used |
| 8 | Pressure Control (PC) Solenoid 3 |
| 9 | Transmission Fluid Pressure Switch 1 |
| 10 | Transmission Fluid Pressure Switch 3 |
| 11 | Transmission Fluid Pressure Switch 5 |
| 12 | Pressure Control Solenoid 5 |
| 13 | Shift Solenoid 1 |
The control solenoid valve assembly contains the following components:
- Transmission control module (TCM)
- Clutch pressure control solenoids
- Shift solenoids
- Line pressure control solenoid
- Transmission fluid temperature sensor
- TCM temperature sensor
- Power-up temperature sensor
- Transmission fluid pressure switches
These components are not serviced separately. The control solenoid valve assembly utilizes a lead-frame system to connect these components electrically to the TCM. No wires are used for these components. The control solenoid valve assembly bolts directly to the lower and upper valve body assemblies inside the transmission. The control solenoid valve assembly connects to the engine harness through the X116-way connector.