LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Mechanical - Hybrid (LZ1) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Upper Intake Manifold Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Vacuum Brake Booster Hose
    GM1697051Courtesy of GENERAL MOTORS COMPANY
  1. Remove the intake manifold. Refer to Intake Manifold Replacement .
  2. Reposition the brake booster vacuum hose clamp at the intake manifold.
  3. Remove the brake booster vacuum hose from the intake manifold nipple.
    4. Fig 2: View Of Upper Intake Manifold Cover & Nut
    GM1697057Courtesy of GENERAL MOTORS COMPANY
  4. Remove the upper intake manifold cover nut.
  5. Remove the upper intake manifold cover.
scientia non olet · About LEMON Manuals