LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Mechanical - Hybrid (LZ1) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Positive Crankcase Ventilation Hose/Pipe/Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of PCV Hose
    GM1696791Courtesy of GENERAL MOTORS COMPANY
  1. Remove the intake manifold sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .
  2. Remove the positive crankcase ventilation (PCV) dirty air hose from the intake manifold fitting and left valve rocker arm cover, if required.
    3. Fig 2: View Of PCV Tube
    GM1696754Courtesy of GENERAL MOTORS COMPANY
  3. Remove the PCV fresh air tube (1) from the air cleaner outlet duct, if required.
    4. Fig 3: View Of PCV Tube & Right Valve Rocker Arm Cover Fitting
    GM1696757Courtesy of GENERAL MOTORS COMPANY
  4. Remove the PCV fresh air tube (1) from the right valve rocker arm cover fitting (2), if required.
  5. Remove the appropriate PCV hose/tube from the vehicle.
scientia non olet · About LEMON Manuals