LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Mechanical - Hybrid (LZ1) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Automatic Transmission Flex Plate Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Automatic Transmission Flex Plate & Bolts
    GM1970247Courtesy of GENERAL MOTORS COMPANY
  1. Remove the automatic transmission. Refer to Transmission Replacement .
    2. NOTE:

    Note the position and direction of the engine flywheel before removal.

  2. Remove the flywheel bolts (1).
  3. Remove the flywheel.
scientia non olet · About LEMON Manuals