LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Hybrid/EV Cooling System) >> Diagnostic Information and Procedures >> DTC P0A9C-P0A9E, P0AC6-P0AC8, P0ACB-P0ACD, P0AE9, P0AEA, or P0AEB >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.
  1. Verify that DTC P0A80, P0A81 or P0BBD is not set.
  2. Ignition ON, observe the scan tool BECM hybrid battery temperature parameters. The readings should be between -39 and +95°C (-38.2 and +203°F) with no greater than a 15°C (59°F) difference between any of the four temperature sensor readings. Refer to Temperature Versus Resistance .
scientia non olet · About LEMON Manuals