Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P1516
The ECM detects the actual throttle position does not match the predicted throttle position for greater than 1 s.
P2101
The ECM detects the actual throttle position does not match the predicted throttle position for greater than 1 s.
P2119
The ECM detects the throttle blade did not return to the default position when the TAC motor is de-energized for greater than 1 s.
P2176
The ECM detects that both throttle position (TP) sensors were greater than a predetermined voltage during the minimum throttle learn procedure for greater than 2 s.