Conditions for Running the DTC

P0601, P0604

• The ignition is in Run or Crank.
• These DTCs run continuously when the above condition is met.

P0602, P0603, P062F 

These DTCs run once per ignition cycle.

P0606, P0607

• Reduced engine power is not active.
• The ignition voltage is greater than 6.0 V.
• These DTCs run continuously when the above conditions are met.

P060D

• The engine is operating.
• The ignition voltage is more than 6.0 V.
• Reduced engine power is not active.
• DTCs P2120, P2122, P2123, P2125, P2127, P2128, P2138 are not set.
• DTC P060D runs continuously when the above conditions are met.

P16F3

• The engine is operating.
• DTC P16F3 runs continuously when the above condition is met.

P2610

• The intake air temperature is between -40 to +125°C (-40 to +257°F).
• DTC P2610 runs on ECM power down.