Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P0335 Condition 1

Engine cranking and the ECM does not detect a crankshaft position sensor pulse for greater than 4 s.

Condition 2

Engine running and the ECM does not detect a crankshaft position sensor pulse for greater than 0.3 s.

Condition 3

Engine running and the ECM does not detect a crankshaft position sensor pulse for 2 out of 10 engine revolutions.

P0336 Condition 1

Engine running and the ECM detects that 25 or more crankshaft resynchronizations have occurred within 20 s.

Condition 2

Engine running and the ECM does not detect crankshaft synchronization for greater than 0.4 s.

Condition 3

The starter is engaged and the ECM does not detect crankshaft synchronization for greater than 1.5 s.

Condition 4

The ECM detects less than 51 or greater than 65 crankshaft position (CKP) sensor pulses during 1 revolution for 8 out of 10 engine revolutions.