Conditions for Running the DTC

P0324

• DTC P0325, P0326, P0327, P0328, P0330, P0332, or P0333 are not set.
• The engine speed is at least 400 RPM.
• DTC P0324 runs continuously when the above conditions are met.

P0325 or P0330

• DTC P0324, P0325, P0326, P0327, P0328, P0330, P0332, or P0333 are not set.
• The engine speed is at least 400 RPM.
• The engine coolant temperature (ECT) is warmer than -40°C (-40°F).
• The engine run time is at least 2 s.
• The power take-off (PTO) is not active.
• DTCs P0325 and P0330 run continuously when the above conditions are met.

P0326

• DTC P0068, P0606, P1516, P2101, P2135, or P2176 are not set.
• The engine speed is at least 400 RPM.
• The MAP is at least 10 kPa.
• DTC P0324 runs continuously when the above conditions are met.

P0327, P0328, P0332, and P0333

• The engine coolant temperature (ECT) is warmer than -40°C (-40°F).
• The engine run time is at least 2 s.
• DTCs P0327, P0328, P0332 and P0330 run continuously when the above conditions are met.