LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Controls/Fuel - Hybrid (LZ1) - DTC P0010 To DTC P0341) >> Diagnostic Information and Procedures >> DTC P0231, P0232, or P023F >> Conditions for Running the DTC

Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

P0231, P023F 

The ignition voltage is between 9-18 V.

P0232 

The control enable voltage signal supplied for the ECM to FPCM is inactive for 4 seconds after engine has been shut off.

scientia non olet · About LEMON Manuals