Conditions for Running the DTC

P0131, P0137, P0151, or P0157

• DTCs P0068, P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0120, P0121, P0122, P0123, P0128, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0220, P0222, P0223, P0442, P0443, P0446, P0449, P0455, P0496, P1516, P2101, P2119, P2135, P2176 are not set.
• The engine is operating in Closed Loop.
• The Ignition 1 voltage is between 10-18 volts.
• The fuel level is greater than 10 percent.
• The throttle position (TP) is between 3-70 percent.
• DTCs P0131 and P0132 run continuously when the above conditions are met for 2 seconds.

P0132, P0138, P0152, or P0158

• DTCs P0068, P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0120, P0121, P0122, P0123, P0128, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0220, P0222, P0223, P0442, P0443, P0446, P0449, P0455, P0496, P1516, P2101, P2119, P2135, P2176 are not set.
• The engine is operating in Closed Loop.
• The Ignition 1 voltage is between 10-18 volts.
• The fuel level is greater than 10 percent.
• The throttle position (TP) is between 0-70 percent.
• DTCs P0137 and P0138 run continuously when the above conditions are met for 2 seconds.