Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P0121

The ECM detects the TP sensor is stuck within range for greater than 1 s.

P0120

The ECM detects the TP sensor 1 voltage is less than 0.325 V or greater than 4.75 V for greater than 1 s.

P0122

The ECM detects the TP sensor 1 voltage is less than 0.325 V for greater than 1 s.

P0123

The ECM detects the TP sensor 1 voltage is greater than 4.75 V for greater than 1 s.

P0220

The ECM detects the TP sensor 2 voltage is less than 0.25 V or greater than 4.59 V for greater than 1 s.

P0222

The ECM detects that the TP sensor 2 voltage is less than 0.25 V for greater than 1 s.

P0223

The ECM detects the TP sensor 2 voltage is greater than 4.59 V for greater than 1 s.

P2135

The ECM detects the difference between the TP sensor 1 and TP sensor 2 exceeds a predetermined value for greater than 1 s.